Sony Settings Menus

Because I found these menus so disorganized that I needed to write them down. Also for handy reference when helping other GTV users. These are taken from an NSZ-GT1 Blu-ray Google TV running 3.2 root. Owners of the TV model can note any differences as they see them.

Settings

• Network

  Manage Internet Connection

  • Ethernet
  • Wi-Fi
  • Status

    View detailed network status

    • IP address
    • Ethernet MAC address
    • Wi-Fi MAC address
    • Local network
    • Internet
    • Ethernet (connection status)
    • Wi-Fi (connection status)
    • Private network
  • Home network setup

    Set up home network connections

    • Edit device name (default = Sony Internet TV)
    • Manage paired remote applications

      Remove pair remote application for mobile

• Video input

  Set up TV service provider

  Lists configured devices. Scans for sources and allows manual addition of devices.

  • Edit channel list

    Select the channels this device receives

  • IR Blaster settings
    • Advanced settings
      • Zero padding (2..6 digits. Default = Minimum)

        Set the channel number digits

      • Key interval (100..1000 by 50s. Default = 250 msec)

        Set the transmission interval for the channel number

      • Send an "Enter" command (checkbox. Default = checked)

        Send an "Enter" command after the channel number

      • Test (launches test)

        Check if the setting is correct

    • Type (non-clickable)
    • Code (allows manual entry of code)
  • HD channels (checkbox. Default = checked)

    Enabled access to HD channels

  • Disconnect device
  • Default TV device
  • Edit channel lineup (launches provider selection)
• TV & AVR

  Set the IR Blaster to control the TV & AV Receiver

  • TV control setting (opens manufacturer list)
  • AV Receiver setting
    • Control with IR Blaster (checkbox)

      Mark the checkbox to control the AV Receiver with the IR Blaster

    • Manufacturer (manually sets manufacturer)
    • Code (manually sets code)
    • IR Blaster test (launches test)
  • Enable TV control (checkbox)

    Mark the checkbox to control the TV with the IR Blaster

  • TV & volume control settings

    Available when Enable TV control is set to On

    • You can check if the setting is correct

• Picture & sound

  Adjust the picture and sound

  • 3D settings

    Change the 3D viewing environment

    • 3D output setting

      Choose whether to output in 2D or 3D

      Auto/Off (default = Auto)

    • TV screen size setting for 3D BD

      Set the screen size for 3D Blu-ray movies

      Three-digit selector for screen size in inches. (default = 46)

  • Resolution

    Select preferred TV resolution

    Auto/1080p/1080i/720p (3D will not work unless set to Auto. Default = Auto)

  • Picture size (launches overscan calibration utility from initial setup)

    Maximize your screen area

  • Screen format

    Set the source's aspect ratio when it differs from the TV

    Original/Fixed aspect ratio (default = Original)

  • YCbCr/RGB (HDMI

    Set the color space conversion for the video signal from HDMI

    Auto/YCbCr(4:4:4)/RGB (default = Auto)

  • Noise reduction

    Reduce repetitive random noise

    High/Medium/Low/Off (default = Off)

  • Screen saver

    Set the screen saver

    Off/10 min/30 min/1 h/2 h/3 h

  • Audio (HDMI) (inactive)
  • Audio output priority

    Set the jack type for audio equipment connection

    HDMI/Optical (default = HDMI)

  • BD audio mix setting

    Set whether to mix interactive audio and output

    On/Off (default = On)

  • Dolby Digital (Optical)

    Set the Dolby Digital output signal from DIGITAL OUT

    Off (Downmix PCM)/On (default = On)

  • Dolby Digital pass-through

    Send Dolby Digital signals from HDMI devices to your audio system

    On/Off (default = On)

  • DTS (Optical)

    Set the DTS output signal from DIGITAL OUT

    Off (Downmix PCM)/On (default = On)

  • Audio DRC

    Set the sound effect when playing a BD or DVD

    Auto/Standard/TV mode/Wide range (default = Auto)

  • Downmix

    Apply the surround effect to the output audio signal

    Surround/Stereo (default = Surround)

  • AV sync

    Adjust the timing between picture and sound

    0-120 msec at increments of 10 msec

  • Sound effects (checkbox. Default = unchecked)

    Enable sound effects

  • Notification sounds (Silent/Default. Default = Silent)
  • Text-to-speech
    • Listen to an example

      Play a short demonstration of speech synthesis

    • Always use my settings (checkbox. Default = unchecked)

      Default settings below override application settings

    • Default Engine (only option is Pico TTS)

      Sets the speech synthesis engine to be used for spoken text

    • Install voice data

      Install the voice data required for speech synthesis

    • Speech rate

      Speed at which the text is spoken

      Very slow/Slow/Normal/Fast/Very fast

    • Language (only option is English (United States))

      Sets the language-specific voice for the spoken text

    • Pico TTS

      Pico TTS settings

• Disc Player settings

  Change general settings

  • Timer

    Set timer to power on or off

    Displays artsy clock. Allows multiple setting timers for on or off (or so it appears) to time, day of week, and duration, as well as sleep timer of 15-120 minutes.

  • Eco

    Change the settings related to power consumption

    • Quick start

      Set the unit to power on quickly

      On/Off. Unit powers on much more quickly but consumes more power while powered off.

    • Auto standby

      The unit automatically turns off after 2 hours of non-operation.

      On/Off (default = Off)

  • HDMI settings

    Change the settings for controlling compatible HDMI devices

    • Control for HDMI

      Control the unit with the HDMI-connected TV

      On/Off (default = On)

    • Unit auto power off

      Power off unit when the HDMI-connected TV is turned off

      On/Off (depends on previous option On. Default = Off)

  • Cinema conversion mode

    Set the conversion method for video or film material

    Auto/Video

  • BD-ROM 1080/24p output

    Output a 1080/24p video signal from HDMI

    Auto/Off

  • Auto display

    Display info when switching audio modes or during playback

    On/Off (default = On)

  • BD/DVD viewing settings

    Set the language displayed on BD or DVD menus

    • BD/DVD menu (opens language selector)

      Set the language displayed on BD or DVD menus

    • Audio (opens language selector. Default = Original)

      Set the audio language when playing a BD or DVD

    • Subtitle (opens language selector)

      Set the subtitle language when playing a BD or DVD

  • BD Internet connection

    Allow Internet connection from BD content

    Allow/Do not allow (default = Do not allow)

  • BD data management

    BD data management

    • Erase BD data

      Used capacity listed

• Search

  Manage searchable items, clear shortcuts

  • Searchable items (opens list of installed applications with checkboxes for each)

    Choose applications to search

  • Clear shortcuts

    Clear shortcuts to recently chosen search suggestions

• Applications

  Manage applications and development options

  • Manage applications

    Manage and remove installed applications

    View applications by Downloaded, All, or Running. View internal storage amount used/free and RAM amount used/free. View application storage use, access settings, and stop applications and services.

  • Running services

    View and control currently running services

    Same as previous menu option, opening to different default page.

  • Development

    Set options for application development

    • Remote debugging (checkbox. Default = checked)

      Allow connections from debugging tools

    • 'Debugger IP address (needs to be set to IP address of system you are running adb on)
    • Mock locations (checkbox. Default = checked)

      Allow mock locations

• Input device

  Manage input devices, IP remotes

  • Manage IP remotes

    Connect and disconnect IP remotes

    • Connect to new IP remotes (checkbox. Default = checked)

      Accept new pairing requests

    • Paired IP remotes list if configured
  • Chrome to TV (launches feature setup)

    Push links to this device from Google Chrome

  • Pointer speed (opens selection slider)

    Mouse and trackpad speed

  • Current keyboard

    Configure current keyboard

    • English (US) Keyboard (Android keyboard) / English Voice (Android keyboard) / Remote Keyboard
    • Configure input methods (opens same panel as next option)
  • Configure input methods (opens panel with inactive options)

    Configure input methods

• Accounts & sync

  Manage accounts and data sync

  • Background data (checkbox. Default = checked)

    Applications can sync, send, and receive data at any time

  • Auto-sync (checkbox. Default = checked)

    Applications sync data automatically

  • Accounts listed if configured
  • Option to add account
• Privacy & safety

  Manage privacy, safety and lock settings

  • Reporting (checkbox. Default = unchecked)

    Automatically send Google TV usage statistics and crash reports to Google

  • Factory data reset (I'm not going to see if this is clickable.)
  • Video history (checkbox. Default = unchecked)

    Enable history of video watching such as TV channels

  • Clear video history (depends on previous option checked)
  • SafeSearch

    Block adult content from appearing in search results

    • Strict filtering / Moderate filtering (default) / Do not filter
  • Application lock

    Require PIN to use Google Chrome & Market

    • Lock Google Chrome & Market (checkbox. Default = unchecked)
    • Change PIN (depends on previous option checked)
  • Parental lock (launches prompt for "4 number" password)

    Block unwanted programs or content

  • Back up my data (checkbox. Default = checked if Google account configured)

    Back up application data and other settings to Google servers

  • Backup account (allows addition of account(s))
  • Automatic restore (checkbox. Default = checked if Google account configured)

    If I reinstall an application, restore backed up settings or other data

• Storage

  Unmount USB storage, view available storage

  • Total (non-clickable. 3.72GB for NSZ-GT1)
  • Available (non-clickable)
  • Enable FTP access (checkbox. Default = unchecked)
  • Media storage devices listed if any are connected
• Date, time & location

  Set date, time, time zone and formats

  • Automatic (checkbox. Default = checked)

    Use network-privded time

  • Set date (depends on first option unchecked)
  • Select time zone
  • Set time (depends on first option unchecked)
  • Use 24-hour format (checkbox. Default = unchecked)
  • Select date format
  • Set location (zip code)
• Accessibility

  Manage accessibility options

  • Enable accessibility services (checkbox. Default = unchecked)
  • TalkBack (checkbox. depends on first option checked. Default = unchecked)
  • Download accessibility scripts (checkbox. depends on first option checked. Default = unchecked)

    Allow applications to download accessibility scripts from Google

• About

  System information

  • System updates (checks for updates)
  • System tutorial (launches tutorial)
  • Model number (non-clickable)
  • Firmware version (non-clickable)
  • Build number (non-clickable)
  • Contact Sony

    Website and phone contact for Sony product support

    • Website support (opens website)
    • United States phone contact (non-clickable)
    • Model name (non-clickable)
    • Serial number (non-clickable)
    • Software version (non-clickable & shows no info)
    • Disc drive version (non-clickable)
    • Sub micro version (non-clickable)
    • RF module version (non-clickable)
  • Open source licenses (opens text window)
  • Google legal (opens legal browser)
  • Sony legal (opens legal browser)