Google OnHub (TP-Link)

Information

• Name: Google OnHub
• Manufacturer: TP-Link
• Firmware Version: 7077.122.4

The router appears to run Gentoo Linux.

Hardware Specs

• WiSoC – Qualcomm Atheros IPQ8064 dual core Krait processor @ 1.4 GHz
• System Memory – 1GB DDR3L
• Storage – 4GB eMMC, 8MB NOR flash
• Connectivity
  • 802.11 b/g/n 3×3 with smart antenna
  • 802.11 a/n/ac 3×3 with smart antenna
  • AUX wireless (802.11 a/b/g/n/ac 1×1)
  • 10/100/1000M Mbps WAN and LAN port (QCA9337 Gigabit switch)
  • Compatible with Zigbee/Thread , Bluetooth 4.0
  • Wireless Security – WPA2-PSK
  • 13 antennas in total
  • Supports up to 128 devices over WiFi
• USB – 1x USB 3.0
• Audio – 3W Speaker
• Security – Infineon SLB 9615 Trusted Platform Module
• Misc – 6x tri-color array LEDs, ambient light sensor
• Power Supply – 12V/3A DC, 100-240V 50-60Hz AC
• Dimensions – 19.05 cm (H) x 11.68 cm (⌀)
• Weight – 860 grams

Board Chipset

• Qualcomm Atheros IPQ8064 Internet Processor with 2 Krait 300 CPUs clocked at 1.4 GHz
• Micron MT41K256M16HA 4 Gb DDR3L SDRAM
• Qualcomm Atheros QCA8337
• Qualcomm Atheros QCA9882
• Qualcomm Atheros QCA9880
• Silicon Labs EM3581 SOC network co-processor for ZigBee
• Skyworks 66109 2.4 GHz ZigBee/Smart Energy front-end module

Configuration

For the moment it is reported that this router can only be configured from the Android or iOS "Google OnHub" application.

Pictures

Disassembly

Community Links

• Google OnHub at XDADevelopers Forum
• Google OnHub Google+ Unofficial Community