ADT-1 Android TV

"Although the information we release has been verified and shown to work to the best our knowledge, we cant be held accountable for bricked devices or roots gone wrong."

This page will be dedicated to a general overview of descriptions and information related to the ADT-1 Android TV.

Purchase

The ADT-1 is not available for purchase and is only obtained through purchase from individuals who obtained a unit at Google IO or through the official "Request an ADT-1" page.

Tear Down

The ADT-1 Android TV is pretty easy to get apart once all the clips holding the case together are undone. In this tear down we used a razor blade but a guitar pick or similar small and durable piece of plastic is recommended.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Accessing Fastboot

• The bootloader on the ADT-1 distributed from Google IO comes unlocked. Below is the process on accessing fastboot interface.

Steps to enter recovery mode

1. Hold reset button on back of ADT-1 for approximately 10 seconds or until device reboots.
2. Screen will display fastboot options as seen in picture to the left. A short click of the reset button navigates while a long click selects.

Accessing Recovery

On the ADT-1 the standard "Android Recovery (3e)" is used. The menu for this mode is hidden behind Auto-Recovery functionality which clears the user-data and cache partitions.

Steps to enter recovery mode

• Through adb using "adb reboot recovery"
• Through the fastboot menu accessed with the process above.
• By holding the reset button for roughly 20 seconds.

• 
• 
• 

Bootloader Vars

• A list of the bootloader variables obtained from using fastboot and issuing "fastboot getvar all" can be found at ADT-1 Fastboot Bootloader Variables

Build.prop

• A sample build.prop from an Android TV ADT-1 device can be found at ADT-1 Android TV Sample Build.prop

SysRq

• SysRq is available with the following commands.

SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)

Fiq

• SysRq is available with the following commands.

debug> help
FIQ Debugger commands:
 pc            PC status
 regs          Register dump
 allregs       Extended Register dump
 bt            Stack trace
 reboot [<c>]  Reboot with command <c>
 reset [<c>]   Hard reset with command <c>
 irqs          Interupt status
 sleep         Allow sleep while in FIQ
 nosleep       Disable sleep while in FIQ
 console       Switch terminal to console
 cpu           Current CPU
 cpu <number>  Switch to CPU<number>
 ps            Process list
 sysrq         sysrq options
 sysrq <param> Execute sysrq with <param>