Google OnHub (TP-Link)

From Exploitee.rs

Revision as of 15:15, 19 September 2015 by Martiniturbide (talk | contribs)

Information

  • Name: Google OnHub
  • Manufacturer: TP-Link
  • Firmware Version: 7077.122.4

The router appears to run Gentoo Linux.

Hardware Specs

  • WiSoC – Qualcomm Atheros IPQ8064 dual core Krait processor @ 1.4 GHz
  • System Memory – 1GB DDR3L
  • Storage – 4GB eMMC, 8MB NOR flash
  • Connectivity
    • 802.11 b/g/n 3×3 with smart antenna
    • 802.11 a/n/ac 3×3 with smart antenna
    • AUX wireless (802.11 a/b/g/n/ac 1×1)
    • 10/100/1000M Mbps WAN and LAN port (QCA9337 Gigabit switch)
    • Compatible with Zigbee/Thread , Bluetooth 4.0
    • Wireless Security – WPA2-PSK
    • 13 antennas in total
    • Supports up to 128 devices over WiFi
  • USB – 1x USB 3.0
  • Audio – 3W Speaker
  • Security – Infineon SLB 9615 Trusted Platform Module
  • Misc – 6x tri-color array LEDs, ambient light sensor
  • Power Supply – 12V/3A DC, 100-240V 50-60Hz AC
  • Dimensions – 19.05 cm (H) x 11.68 cm (⌀)
  • Weight – 860 grams

Board Chipset

  • Qualcomm Atheros IPQ8064 Internet Processor with 2 Krait 300 CPUs clocked at 1.4 GHz
  • Micron MT41K256M16HA 4 Gb DDR3L SDRAM
  • Qualcomm Atheros QCA8337
  • Qualcomm Atheros QCA9882
  • Qualcomm Atheros QCA9880
  • Silicon Labs EM3581 SOC network co-processor for ZigBee
  • Skyworks 66109 2.4 GHz ZigBee/Smart Energy front-end module
  • Skyworks SKY2623L 2.4 GHz WLAN power amplifier
  • Skyworks SKY85405 802.11ac 5 GHz WLAN power amplifier
  • Atheros 3012-BL3D Bluetooth radio
  • Bluetooth antenna
  • Micron MTFC4GACAAAM 4 GB NAND flash
  • Micron 25Q064A 64 Mb SPI flash
  • Infineon SLB9615 Trusted Platform Module

Configuration

For the moment it is reported that this router can only be configured from the Android or iOS "Google OnHub" application.

Pictures

Disassembly

Articles

Retrieved from "https://wiki.exploitee.rs/index.php?title=Google_OnHub_(TP-Link)&oldid=2514"