Google Chromecast

From Exploitee.rs
Revision as of 01:22, 7 February 2016 by Resno (talk | contribs) (Text replacement - "gtvcom-20" to "exploiteers-20")
Jump to navigationJump to search

"Although the information we release has been verified and shown to work to the best our knowledge, we cant be held accountable for bricked devices or roots gone wrong."

Chromecast-stock.jpg

This page will be dedicated to the hardware specifications, descriptions, and information related to the Google Chromecast (H2G2-42).

Purchase

Buying devices is expensive and, in a lot of cases our testing leads to bricked equipment. If you would like to help support our group, site, and research please use one of the links below to purchase your next device.

Purchase the Google Chromecast at Amazon

Specs

  • Azure Wave AW-NH387 - 802.11 b/g/n WLAN, Bluetooth, FM combo module IC
  • Marvell 88DE3005 (DE3005-A1)
  • Micron 29F16G08CBACA (2GiB Flash NAND)
  • Micron 3FE77D9PXV (512MB RAM)

CPU Info

The following info has been pulled from /proc/cpuinfo on the Chromecast.

Processor       : ARMv7 Processor rev 0 (v7l)
BogoMIPS        : 1594.16
Features        : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x3
CPU part        : 0xc09
CPU revision    : 0
Hardware        : MV88DE3100
Revision        : 0301
Serial          : 0000000000000000

Software

At its core Google Chromecast is Android. Items below can be found that help describe the Chromecast operating environment.

  • Chromecast Build.prop - A build.prop that details all the config props setup on the device in its shipped configuration.

UART

After taking the Google Chromecast apart and also removing the shielding, you receive access to a 17 point unpopulated pad. This pad contains an RX, TX and GND for UART. Currently this only displays console output from the initial boot process.

  • Settings: 115200 8n1
  • Console Out: Log
Google Chromecast UART Pinout
  • A great teardown of the Google Chromecast by ifixit.com is available for disassembling the device.

Bootloader Exploit Package

Items Needed:

  • Blank USB Flash drive (at least 128MB) –Your drive will be erased–
  • Our USB Image
  • Google Chromecast
  • Powered Micro USB OTG Cable
  • If not a Powered Micro USB OTG Cable, then find a way to rig up a cable that does just this. We will not provide instructions, it’s simple, but still. Just buy the cable.

Pre-Setup:

  1. Download .zip and extract the "gtvhacker-chromecast.bin" file.
  2. Install our USB image as a whole to your USB flash drive with dd:
Syntax:   dd if=gtvhacker-chromecast.bin of=/dev/sdX bs=1024

Root Process:

  1. Plug the flash drive into one female “A” end of the USB OTG cable
  2. Plug the other end into the Chromecast
  3. Hold down the button on the Chromecast while plugging in the power cord.
  4. Watch the screen, and any blinking light on your flash drive. The Chromecast will power up, execute our unsigned kernel, kick off to a script that replaces /system with a rooted one. It will then wipe /data, and reboot back to the normal system. All of this should take about a minute. Don’t unplug anything while it is installing.
  5. When it is complete, your box will reboot, and you will see a new splash screen, and then the Setup screen. Just re-set up your Chromecast, and you can telnet to get a root shell on your Chromecast on port 23!

Bootloader Exploit Package Download

Gallery